Categories

Payment

  • Ebay

Shipment

  • Hongkong post
  • EMS
  • FEDEX

Lumenier QAV-S JohnnyFPV Special Edition 5" FPV Freestyle Drone Frame Kit

Lumenier QAV-S JohnnyFPV Special Edition 5
Part No.: QAV-S
Manufacturer: Feixiang

Send to a friend

Your name:
Your e-mail:
Recipient's email:

Features

The Johnny FPV QAV-S is a 5-inch (6" and 7" arms available as well) freestyle and cinematic airframe that is ultra-durable, easy to work on, and locked-in to perform and provide the best flight possible. This Special Edition has many small details that were well-thought-out.

-- Premium Lumenier carbon fiber with finished and chamfered edges
-- FPV camera mounting solution from CNC anodized aluminum that can be reversed to give versatility for the different camera sizes (mini size / dji size / micro size)
-- HD camera vibration damping system with custom CNC aluminum spacers mounted on rubber grommets to achieve a vibration free platform for your HD recording camera
-- The QAV-S arm locking system includes a unique hinge + press nut that elegantly secures the arms while requiring only one screw to swap the arm (does not effect electronic's stack, separate mounting system)
-- Split (2-piece) bottom plate that gives enough room for a mini camera, while also reducing the rear deck space for components
-- An isolated 20x20 and 30x30 stack mounting that lets you take care of your electronics stack without the need to alter the frame structure and overall build
-- Dji compatibility, including a custom mounting solution that secures the Air Unit in place without any additional hardware
-- Antenna mounting versatility, allowing for both HD and Analog antenna mounting, as well as SMA extension mounting all on the same semi-flexible molded rubber mount
-- Dedicated space and tie down slots for capacitor and / or radio receiver behind FPV camera

Product Details

Material
- Premium Lumenier 3K Carbon Fiber (fully chamfered)
- High Grade CNC Aluminum
- 12.9 Black Oxide Steel Hardware
- Injection Molded Rubber
- Molded Foam
Weight
- 129g Airframe + Hardware
- 139g Airframe + Hardware + HD Camera Plate / Foam
- 398g Typical RTF with DJI Air Unit (excluding battery)
Width
- 223mm Motor to Motor Diagonal

Item Packing

1 x Lumenier QAV-S JohnnyFPV Special Edition 5" FPV Freestyle Drone Airframe Kit
 - 4x 5mm carbon fiber arms
 - 2mm carbon fiber top plate
 - 2mm carbon fiber split-bottom plate top (with steel press fit nuts)
 - 3mm carbon fiber split-bottom plate bottom
 - 2x black annodized aluminum camera side walls
1 x Set of black steel screws and aluminum hardware including knurled spacers, cable ties, o-rings
1 x Set of foam mounts for DJI Air Unit
1 x Molded rubber antenna mount
1 x No-slip silicone battery pad
1 x Kevlar Indestructibe Battery Strap (20x250mm)
4 x FPVCrate Lume Skids (Smoke Grey)

Detailed Images